Ultra PU HTV

Ultra PU Heat Transfer is a heat transfer media used for cad cutting logos, names & numbers.

As it is manufactured from Polyurethane it is an Eco-friendly product with a soft elastic texture.

It is great to cut, weed & apply and is suitable for cottons, polyesters and cotton/polyester blend.

 

Directions

1. Using a cutting plotter, cut the design in reverse

2. Set heat machine to the desired temperature

3. Prepress garment to remove any moisture

4.  Apply heat for 8-10 seconds, medium pressure

5. Allow to cool for a few seconds, remove the carrier

6. Cover with Teflon & re-hit with Teflon for 2 seconds

Cutting Notes

Always test cut prior to any production run. Cutter settings will need to be adjusted as the blade ages. For optimal cutting and weeding, maintain a line thickness of at least  1/8” for lettering & logos.

Multi-colour Designs

After preheating garment, place cover sheet over graphic and press for 2 seconds, peeling hot. Align the second colour and replace cover sheet. Repeat for additional colours. Finish with the final application of 8-10 seconds.